Kaj ti bo v Sloveniji nadzvočno letalo smo premajhni. Nima dovolj prostora v zraku, da se obrne je že v drugi državi.
0
Tole pravi umetna inteligenca o letalu F-16. In potem neki bedaki se smešite, kako ne more obrniti nad Slovenijo.
Turn Radius by Flight ProfileMinimum Instantaneous Turn Radius (Tightest Circle): ~600 to 700 meters (~2,000 to 2,300 feet). This is achieved at low speeds—around Mach 0.5 to 0.6 (~300 knots)—at low altitudes, where the pilot pulls maximum G-forces near the structural or aerodynamic lift limit.Corner Velocity Turn Radius (Fastest Rate): ~750 to 1,350 meters (~2,500 to 4,500 feet). At corner airspeed—typically 350 to 450 knots—the aircraft achieves its highest turn rate (up to 22–26 degrees per second) while maintaining its energy, though the physical circle is wider.Maximum Speed Turn Radius (Mach 1.2+): ~2,700+ meters (~9,000+ feet). When flying at high supersonic speeds, the turning circle expands significantly due to structural G-limitations ((9.0text{ G})) and aerodynamic forces.
Turn Radius by Flight ProfileMinimum Instantaneous Turn Radius (Tightest Circle): ~600 to 700 meters (~2,000 to 2,300 feet). This is achieved at low speeds—around Mach 0.5 to 0.6 (~300 knots)—at low altitudes, where the pilot pulls maximum G-forces near the structural or aerodynamic lift limit.Corner Velocity Turn Radius (Fastest Rate): ~750 to 1,350 meters (~2,500 to 4,500 feet). At corner airspeed—typically 350 to 450 knots—the aircraft achieves its highest turn rate (up to 22–26 degrees per second) while maintaining its energy, though the physical circle is wider.Maximum Speed Turn Radius (Mach 1.2+): ~2,700+ meters (~9,000+ feet). When flying at high supersonic speeds, the turning circle expands significantly due to structural G-limitations ((9.0text{ G})) and aerodynamic forces.
0
Odgovor lahko oddate kot gost. Vgrajena je časovna omejitev 30 sekund za oddajo novega sporočila.
Opozorilo: po 297. členu
Kazenskega zakonika je vsak posameznik kazensko odgovoren za javno spodbujanje sovraštva, nasilja ali nestrpnosti.
09.07.2026 ob 22:07